BEGIN:VCALENDAR
VERSION:2.0
PRODID:Icfo
X-PUBLISHED-TTL:P1W
BEGIN:VEVENT
UID:6b02349a27df0
DTSTART:20261209T140000Z
SEQUENCE:0
TRANSP:OPAQUE
DTEND:20261209T150000Z
LOCATION:ICFO Auditorium
SUMMARY:ICFO | DAVIDE RIZZOTTI
CLASS:PUBLIC
DESCRIPTION:Loss is one of the main limitations in optical systems. Classic
 al applications are generally relatively tolerant to it: attenuation can o
 ften be compensated through amplification or post-processing\, at the cost
  of increased complexity and cost. Quantum applications are fundamentally 
 more sensitive because information is often encoded in single photons and 
 is lost with them. Multi-photon states can be even more vulnerable\, makin
 g system scalability exponentially sensitive to loss.Current optical syste
 ms combine active and passive components. Active devices are generally bas
 ed on highly nonlinear materials\, such as silicon\, indium phosphide\, or
  lithium niobate\, which are not ideal for low-loss propagation. Light is 
 therefore typically coupled to silica optical fibers\, the standard medium
  for passive transmission and interconnection between devices. Interfacing
  different material platforms\, however\, inevitably introduces additional
  coupling loss. This thesis aims to reduce this contribution by following 
 an alternative approach: using optical fibers themselves as the active mat
 erial minimizing the need to interface different platforms. The work focus
 es on two main devices\, which eventually could even be combined.The first
  project explores a novel fused fiber-bundle-like device containing embedd
 ed electrodes for active signal modulation. By relying on standard compone
 nts and post-processing techniques similar to those used for fused fiber b
 undles\, the structure can provide a low-loss interface between standard f
 ibers and complex multi-material cross sections. I fabricated devices with
  a total insertion loss below 0.5 dB. Separately\, I demonstrated light mo
 dulation through the DC-Kerr effect with a half-wave voltage below 20 kV. 
 I then analyzed how these results could be combined and further improved t
 oward an ultra-low-loss\, electrically controlled fiber modulator.The seco
 nd project investigates silicon core fibers (SCFs)\, a type of fiber that 
 consists of a crystalline silicon core surrounded by a pure silica claddin
 g. To the best of my knowledge\, I present the first experimental study of
  their use for quantum applications\, specifically as a photon-pair source
  in the C-band based on intramodal four-wave mixing. A measured intrinsic 
 brightness of 570 kHz/nm/mW^2\, a coincidence-to-accidental ratio of 133&p
 lusmn\;2\, and a propagation loss of ≲0.3 dB/cm showed that SCFs can sup
 port room-temperature quantum sources with performance comparable to\, and
  potentially better than\, existing sources based on similar technologies.
  Coupling to SCFs was identified as the current main practical limitation 
 of this platform\, and I therefore proposed an alternative coupling strate
 gy. The strategy is based on an adiabatic transition through fiber taperin
 g between core-modes and cladding-modes\, exploiting the fact that the cla
 dding of both SCFs and standard fibers are made of the same material\, nam
 ely pure silica. Simulations suggest that the coupler loss could ultimatel
 y be limited by propagation loss in the SCF section\, while preliminary ex
 periments reached a loss of 8.6 dB/coupler.The results obtained during my 
 PhD show that optical fiber-based devices represent a promising platform w
 hen minimizing loss is the primary performance objective. I envision quant
 um applications\, specifically communication and memories\, and reconfigur
 able classical networks to be the main fields of interests of ultra-low-lo
 ss active devices.\nWednesday December 9\, 15:00 h. ICFO Auditorium Thesis
  Director: Prof. Dr. Valerio Pruneri and Dr. Stefano Signorini
DTSTAMP:20261122T001730Z
END:VEVENT
END:VCALENDAR